基于GIS单线图的配网停电单模拟操作应用研究

配电网停电会造成电力系统供配电可靠性以及服务质量下降,研究基于地理信息系统(GIS)单线图的配网停电单模拟操作应用。利用网格长度作为基本单位建立坐标系,以选取起始点与终止点为基础,通过四参数法将GIS坐标映射至图纸网格内,实现配网内设备初步布局,将杆塔、站房和整体均匀分布作为优化目标,设置多目标优化目标函数实现GIS单线图最终优化。选取某电力公司配网作为单模拟操作应用对象,模拟结果表明,单模拟操作配网停电后,该配网各负荷点年故障率、次平均停电时间以及年停电时间均有所减少,可有效提升配网的供配电可靠性。     

坐席管理与大屏幕处理一体化融合系统

针对控制室大屏幕控制与多个系统业务操作不便的困难,构建一个坐席管理与大屏幕处理一体化融合的处理系统,研究信号处理与坐席管理一体化融合、键鼠自由无缝漫游控制多设备等关键技术,满足大型复杂控制室、调度指挥中心当前及未来超大规模超高分辨率信号信息的接入、处理、分析及输出显示需求,并有效管理控制室设备,降低用户成本,解决用户信息安全、各席位工作孤立的问题.     

BOPET薄膜市场现状分析及发展趋势

基础BOPET全球生产市场需求分析,尤其对中国BOPET的市场需求、市场分布、生产厂家、产能等全方面进行了分析,得出BOPET行业市场发展将向再生利用、生物可降解、绿色改性以及降低单耗等五方面可持续发展.     

Effect of phosphogypsum on saline-alkalinity and aggregate stability of bauxite residue

A column experiment was conducted to investigate the effect of phosphogypsum (PG) on the saline- alkalinity, and aggregate stability of bauxite residue. Results showed that: with increasing leaching time, the concentrations of saline-alkali ions decreased while the concentration increased in bauxite residue leachate; compared with CK (control group) treatment, pH, electric conductivity (EC), exchangeable sodium percentage (ESP), sodium absorption ratio (SAR), and exchangeable Na⁺ content of bauxite residue were reduced following PG treatment; average particle sizes in aggregates following CK and PG treatments were determined to be 155 and 193 nm, respectively. SR-μCT test results also confirmed that bauxite residue following PG treatment acquired larger aggregates and larger pore diameter. These results indicate that the PG treatment could significantly modulate the saline-alkalinity, and simultaneously enhance aggregate stability of bauxite residue, which provides a facile approach to reclaim bauxite residue disposal areas.     

磁性硅铁载铜吸附Hg0动力学机制及密度泛函研究

采用粉末冶金法将纳米单质铜(Cu⁰)、硅铁(FeSi)、四氧化三铁硅涂层(Fe₃O₄@SiO₂)混合煅烧并制备出新型磁性硅铁载铜吸附剂MagFeSi-Cu⁰。实验研究不同烟气温度下MagFeSi-Cu⁰的汞吸附能力基础上,结合颗粒内扩散模型、准二阶动力学模型、Elovich模型及Bangham模型分析了MagFeSi-Cu⁰吸附Hg⁰过程的主要控制步骤。在此基础上,依据密度泛函理论(DFT)研究了不同反应温度下FeSi表面Cu⁰原子与Hg⁰原子的汞齐作用机制。研究结果表明,Bangham模型的拟合值与MagFeSi-Cu⁰汞吸附实验值拟合度最高,MagFeSi-Cu⁰表面痕量Hg⁰吸附由汞的外扩散和表面铜汞齐吸附共同控制;通过密度泛函计算,发现Cu⁰颗粒表面Cu-Hg齐吸附能为-0.534 eV,当烟气温度从80℃上升至200℃时,Hg⁰原子与单质Cu原子的吸附自由能从-22.47 kJ/mol下降至-13.96 kJ/mol,这些结果为深入了解Hg⁰在Cu(111)表面的反应机理提供了理论基础。     

应用卡尔曼滤波的激振力时域识别方法研究

激振力识别属于结构动力学中的第二类反问题,为识别振动系统的激励力,本文基于卡尔曼滤波器和最小方差估计的方法,分别建立了以系统位移和加速度为输入参数的激振力时域识别方法.推导了两种方法的识别公式,并对两种方法的识别结果和识别结果的稳健性进行了仿真分析.仿真结果表明,两种方法对噪声方差初值的设定均不敏感;以加速度幅值为输入的方法识别精度优于以位移幅值为输入的方法;以位移幅值为输入的方法识别结果稳健性较好.最后采用力锤敲击试验验证了识别方法的有效性和精度.     

基于数值模拟的嘉兴城区河网水文特征

基于MIKE 11河网水动力模型,利用2010年—2019年实测气象水文资料,分析了嘉兴城区大包围圈内外主要河流的入流和出流特征.结果显示:嘉兴城区主要来流河道是苏州塘和杭州塘,出流河道主要为长纤塘、嘉善塘和平湖塘;平均来流量为88.2 m3/s,出流量为93.3 m3/s;年均和月均来流量变化较大,最枯月的平均来流量为50.1 m3/s,90％保证率枯水月的平均来流量为59.3 m3/s;大包围圈内部河道的平均流量为28.3 m3/s,平均出流量为19.1 m3/s,这表明大量外部来水未进入大包围圈内部河道,而是通过环郊河"短路"绕过嘉兴城区,流向东北;大包围圈内部河道的最枯月平均入流量为14.5 m3/s,90％保证率枯水月的平均入流量为18.3 m3/s.研究结果可为嘉兴城区河网综合规划和生态治理提供科学依据.     

智慧标识网络服务机理研究进展及安全性分析

随着互联网规模的不断扩大以及应用场景的多元化,传统网络无法很好地满足新业务的动态多样化需求,因此国内外对未来网络展开了深入研究.本文首先介绍了未来互联网体系架构的研究现状.其次,介绍了具备"三层、两域"特征的智慧标识网络(Smart Identifier NETwork,SINET)体系架构,然后重点阐述了SINET服务机理在服务的命名与解析、路由机制、服务缓存、移动性、传输控制机制、可扩展性、绿色节能等关键技术方面取得的研究进展,并进一步详细分析了SINET服务机理的安全性.最后总结了SINET面临的挑战,对SINET服务机理在大规模场景部署中可能存在的问题做出讨论.     

A Biologically Muscle-Inspired Polyurethane with Super-Tough,Thermal Reparable and Self-Healing Capabilities for Stretchable Electronics

Polymeric elastomers play an increasingly important role in the development of stretchable electronics. A highly demanded elastic matrix is preferred to own not only excellent mechanical properties, but also additional features like high toughness and fast self-healing. Here, a polyurethane (DA-PU) is synthesized with donor and acceptor groups alternately distributed along the main chain to achieve both intra-chain and inter-chain donor-acceptor self-assembly, which endow the polyurethane with toughness, self-healing, and, more interestingly, thermal repair, like human muscle. In detail, DA-PU exhibits an amazing mechanical performance with elongation at break of 1900% and toughness of 175.9 MJ m⁻³. Moreover, it shows remarkable anti-fatigue and anti-stress relaxation properties as manifested by cyclic tensile and stress relaxation tests, respectively. Even in case of large strain deformation or long-time stretch, it can almost completely restore to original length by thermal repair at 60 °C in 60 s. The self-healing speed of DA-PU is gradually enhanced with the increasing temperature, and can be 1.0–6.15 µm min⁻¹ from 60 to 80 °C. At last, a stretchable and self-healable capacitive sensor is constructed and evaluated to prove that DA-PU matrix can ensure the stability of electronics even after critical deformation and cut off.